# Fence Staining Boerne TX | Boerne Fence

> Fence cleaning, staining and sealing in Boerne, TX, plus restaining older wood fences. $3–$8/ft for a 6 ft fence, one side. Free estimates.

URL: https://boernefence.com/fence-staining-sealing/

$3 – $8 / ft

# Fence Staining Boerne TX Homeowners Use to Keep Cedar From Graying Out

Last updated: September 29, 2026

At 

Boerne Fence

[/ →](/)

, we clean, stain and seal wood fences so the Texas sun doesn't turn them gray and brittle in a few summers. **Fence staining in Boerne, TX** is one of the cheapest ways to add years to a wood fence, and we do it on new fences once the wood is ready and on older fences that need it back.

15+ Years Experience

Licensed & Insured

Free Estimates

![Freshly stained cedar privacy fence with rich even color in a Boerne backyard](https://placehold.co/1920x800/A6641E/ffffff?text=Freshly+stained+cedar+privacy+fence+with+rich+even+color+in+a+Boerne+Texas+backyard+under+bright+midday+sun)

Thanks, we got your request.

We'll call you back soon. If it's urgent, call 830-388-7330.

## Free Staining Estimate

Tell us what you need and where. We'll call you back to set a time to look at it.

Have you ever noticed how a brand new wood fence instantly boosts the curb appeal of a home? Keeping that fresh look requires proper fence staining and sealing.

As a professional service team, we are going to walk you through exactly how to protect your investment.

These simple steps will keep your yard looking amazing. Grab a cup of coffee, and join us as we go through the details together.

## Why Stain a Wood Fence at All?

A new cedar or pine fence looks incredible the day the builders finish up. Leave it bare in the hot Hill Country sun, and it starts losing that vibrant color fast. Untreated cedar can begin turning a dull gray in as little as two to four weeks under direct sunlight.

We highly recommend applying a high-quality finish before that happens. UV rays break down the natural oils, while moisture causes the picket ends to crack and twist. Proper fence staining and sealing prevents this rapid decay.

| Feature | Unstained Wood Fence | Stained & Sealed Fence |
| --- | --- | --- |
| Color Fade | Turns gray in 1 to 4 months | Retains color for 2 to 3 years |
| Water Damage | High risk of warping and rot | Beads water and resists rot |
| Lifespan | Noticeable decay much faster | Lasts significantly longer |

Replacing a standard residential wood fence costs an average of $4,500 in 2026. Our guide on 

whether fence staining is worth it

[/guide/is-fence-staining-worth-it/ →](/guide/is-fence-staining-worth-it/)

 runs the exact numbers on long-term maintenance versus premature replacement. Staining provides a protective barrier that slows down both sun and water damage.

A good semi-transparent penetrating oil blocks harmful rays and forces water to bead up and roll off. We know this simple maintenance is the absolute cheapest way to hold your fence together longer. This easy step protects your property value for years to come.

## How We Stain a Fence

### 1\. Check the fence first

We always start by inspecting the structure for loose pickets, rotten boards, and leaning posts. There is absolutely no reason to coat a board that is already failing.

Our team fixes those structural issues first through our 

fence repair

[/fence-repair/ →](/fence-repair/)

 service if you need the help. Fixing hardware ensures the foundation is solid before adding cosmetics.

### 2\. Clean and brighten

A specialized wood cleaner and brightener combination removes the gray surface fibers, mildew, and dirt. We carefully use a low-pressure wash to rinse everything away safely.

Using too much pressure is a very common DIY mistake that permanently tears up the wood grain. Professionals strongly suggest keeping the pressure washer setting between 500 and 800 PSI for softwoods like pine and cedar.

We stick to that safe range to prevent fuzzy, damaged boards. A 40-degree nozzle tip helps fan the water out gently.

### 3\. Let it dry

Stain simply cannot soak into wet wood fibers. We wait for the internal moisture content to drop and schedule the application during a dry, mild stretch.

Industry best practices require the wood moisture content to read 13 percent or lower before applying any oil-based products. Our technicians use digital moisture meters to verify the boards are truly ready.

Applying a finish to damp wood traps moisture and causes the product to peel off later.

### 4\. Spray and back-brush

An airless sprayer applies the liquid onto every single picket incredibly fast. We immediately follow up with a technique called back-brushing.

This essential step works the product deep into the grain and evens out any drips or thin spots. Our standard process guarantees a much smoother, more uniform appearance.

Skipping the brush work often leaves unsightly run marks down the entire length of the yard.

### 5\. Protect everything nearby

Overspray travels easily on a breezy day. We cover siding, windows, plants, patios, and parked cars before pulling the trigger.

Taking 30 minutes to prep the surroundings prevents hours of frustrating cleanup. Our crew treats your property with the exact same respect we would give our own homes.

Safety and cleanliness are just as important as a beautiful finish.

## When Should You Stain a New Fence?

Not right away.

New lumber often arrives with a smooth mill glaze on the surface and a high volume of internal moisture. We never recommend applying product on day one. Coating it too soon means the liquid just sits on top and flakes right off within months.

Our experts test the wood and put the project on the calendar once it is fully ready to absorb the finish. Pressure-treated pine usually takes three to six months to dry out, while cedar might only need a few weeks.

For older fences, you can perform a quick water test to check the current protection level. We suggest trying this simple trick every spring.

-   **The Splash Test:** Toss a handful of water against a few different boards.
-   **The Bead Reaction:** If the water forms tight little beads, your current seal is still working perfectly.
-   **The Darkening Effect:** If the water immediately soaks in and darkens the fibers, you desperately need a new coat.

## Spray, Roll or Brush?

Each application method has a specific place in outdoor maintenance. Spraying is highly efficient and easily reaches into the tight gaps between overlapping pickets.

We know that using a roller or brush alone pushes the product into the wood better but takes significantly longer. Painting a 150 foot boundary by hand could consume your entire weekend.

Our hybrid approach of spraying followed immediately by back-brushing gives you the absolute best of both worlds. This method maximizes penetration while keeping labor costs reasonable for property owners.

| Application Method | Speed | Penetration | Best For |
| --- | --- | --- | --- |
| Hand Brushing | Very Slow | Excellent | Small repairs and touch-ups |
| Rolling | Medium | Good | Flat, solid surfaces |
| Spraying Only | Very Fast | Poor | Temporary cosmetic updates |
| Spray & Back-Brush | Fast | Excellent | Long fences and deep protection |

## New Fence and Stain Together

If you are planning to build a brand new 

wood or cedar privacy fence

[/wood-cedar-privacy-fences/ →](/wood-cedar-privacy-fences/)

, you should plan the finishing stage immediately. We can put the sealing appointment on the calendar the same day we finish the build.

This proactive scheduling ensures the vital maintenance step does not slip your mind. Our office tracks the ideal curing time based on the specific wood species you selected.

Protecting your brand new boundary from the elements provides some amazing benefits.

-   **Financial Savings:** Prevents the need for a $4,500 total replacement.
-   **Curb Appeal:** Keeps the rich, natural wood color looking fresh.
-   **Structural Integrity:** Stops pickets from warping, bowing, and splitting.

We know that building and protecting should always go hand in hand. A strong barrier keeps your home secure and looking sharp.

Routine maintenance is the secret to a long-lasting outdoor living space. We want to help you maximize the lifespan of your property with professional fence staining and sealing.

Protecting the wood saves you thousands of dollars in early replacement costs down the road. Our team is ready to answer any questions and get your yard looking its absolute best. Contact us today to schedule a free property assessment and moisture test.

## How Much Does Fence Staining Cost in Boerne?

Installed prices from our price book. We never answer "it depends" without a range.

Typical range

$3 to $8 / ft

per linear foot, 6 ft fence cleaned and stained, one side

Price is per side. Staining both sides of the fence roughly doubles the footage.

Get My Exact Price

[#quote →](#quote)

### Related prices

Staining, 6 ft fence cleaned and stained one side

$3 to $8 per foot

Wood privacy fence, 6 ft (for comparison)

$25 to $45 per foot

Fence repair, most jobs

$300 to $900

### What moves the price within the range

-   **Condition** Very gray or mildewed wood takes more cleaning.
-   **One side or both** Price is per side of the fence.
-   **Height and style** 8 ft and board-on-board have more surface to cover.
-   **Prep and protection** Covering plants, siding and cars near the fence.

**Worked examples:** 150 ft of 6 ft fence, stained on one side, runs about $450 to $1,200.

![Weathered gray cedar fence with cracked picket ends before cleaning and staining](https://placehold.co/800x500/F5F2EB/18221D?text=Weathered+gray+cedar+fence+with+cracked+picket+ends+in+harsh+Texas+sun+before+cleaning+and+staining)

## What Hill Country Sun Does to Bare Wood

UV graying starts within months on bare cedar and pine around Boerne. The sun breaks down the wood fibers on the surface, turning them gray and rough. Then rain soaks into those dried-out fibers, the wood swells and shrinks, and pickets start to crack and cup.

A penetrating oil stain soaks into the wood rather than sitting on top like paint. It blocks much of the UV and lets water bead up and run off. It won't make a fence last forever, but it slows the graying, cracking and rot that push you toward a replacement at $25 to $45 per foot.

UV graying Starts fast on bare wood

Moisture Swelling and shrinking crack pickets

New wood Needs to dry before it takes stain

Restain interval When water soaks in instead of beading

## What a Staining Job Looks Like

Most of the work is prep. The stain goes on last. Click a photo to see it larger.

Before and after on the same fence.

Cleaning and brightening before stain.

Siding, plants and cars covered first.

Sealed wood sheds water instead of soaking it up.

## Why Choose Boerne Fence for Fence Staining?

### Fence builders, not just painters

We spot loose boards and failing posts while we're there, and can fix them before the stain goes on.

### Prep done right

Cleaning and drying time are what make stain last. We don't skip them to save a day.

### Spray and back-brush

Fast coverage from the sprayer, worked into the grain with a brush so it soaks in evenly.

### Clear prices

$3 to $8 per foot for a 6 ft fence, one side. Licensed, insured, free estimates.

## How a Fence Staining Job Works

From the first call to cleanup, here's what to expect.

1.  01
    
    ### Check the fence
    
    We look at the wood, test whether water soaks in, and note any loose boards or posts to fix first.
    
2.  02
    
    ### Clean and brighten
    
    Wood cleaner and brightener plus low-pressure washing take off gray fibers, mildew and mill glaze.
    
3.  03
    
    ### Let it dry
    
    The wood needs to dry out before stain can soak in. We schedule the staining for a dry, mild stretch.
    
4.  04
    
    ### Stain and seal
    
    Stain is sprayed and back-brushed into the wood, with siding, plants and cars covered against overspray.
    

## Fence Staining Questions, Answered

### What does fence staining cost, and is it worth it?

Cleaning and staining a 6 ft fence runs $3 to $8 per foot for one side. It slows graying, cracking and rot, which pushes back the day you pay $25 to $45 per foot to replace the fence.

### When is the best time to stain a fence?

Once new wood has dried out enough to take stain, and on a dry, mild stretch of weather. Older fences are due when the wood grays and water soaks in instead of beading.

### Should fence stain be rolled or sprayed?

Spraying is faster; brushing or rolling works stain into the wood. The best result is usually spraying followed by back-brushing, with cars, siding and plants covered against overspray.

### How soon can I stain a new fence?

New wood often has a mill glaze and high moisture content, so it won't take stain well right away. We test the wood and stain once it's ready, which is usually a matter of weeks, not days.

### How often should a fence be restained?

Watch the water test: when water soaks into the boards instead of beading up, it's time. In Hill Country sun, that's usually every few years for a semi-transparent stain.

### Does staining both sides cost double?

Roughly. The price is per side, so staining both sides covers about twice the surface.

### Can you stain an old gray fence?

Yes, if the posts and boards are sound. Cleaning and brightening takes off the gray surface layer so the stain can soak in. If boards are rotten or posts are leaning, we'll fix those first.

### Do you use paint or stain?

Stain. A penetrating oil stain soaks into the wood and wears down gradually. Paint sits on top and peels, which makes the next round of upkeep much harder.

## Fence Staining and Sealing Guides

Longer answers to the questions we hear most about this work.

Decision guide

### Is Fence Staining Worth It? Cost and Payoff in Texas

Fence staining runs $3–$8/ft for a 6 ft fence, one side. See a worked example and how it compares with replacing the fence early.

Read the guide →

[Is Fence Staining Worth It? Cost and Payoff in Texas →](/guide/is-fence-staining-worth-it/)

## Related Services

Other work we often do on the same property.

![New 6 ft cedar privacy fence along a Boerne backyard with live oaks](https://placehold.co/600x400/A6641E/ffffff?text=Board+on+board+cedar+privacy+fence+with+cap+and+trim+beside+a+Hill+Country+home+on+a+sunny+day)

### Wood and Cedar Privacy Fences

$25 – $45 / ft

Cedar and pine, 6 ft and 8 ft privacy, board-on-board, horizontal and cap-and-trim, with tear-out of the old fence.

See wood & cedar details →

[Wood and Cedar Privacy Fences →](/wood-cedar-privacy-fences/)

![Fence builder resetting a leaning cedar fence post in fresh concrete in a rocky Boerne backyard](https://placehold.co/600x400/A6641E/ffffff?text=Repair+crew+swapping+broken+pickets+and+a+rotted+rail+on+a+weathered+wood+privacy+fence+in+Boerne)

### Fence Repair

$300 – $900 typical

Leaning posts, rotted pickets and rails, wind-damaged sections, sagging gates and iron welds. Fixed so they stay fixed.

See repair details →

[Fence Repair →](/fence-repair/)

![](https://placehold.co/1920x600/18221D/ffffff?text=Long+freshly+stained+cedar+fence+glowing+in+midday+sun+along+a+green+Boerne+lawn+with+oak+trees)

## Ready to Bring Your Fence Back?

Free estimate, straight price range, and a crew that has been setting posts in Hill Country rock for over 15 years.

Get a Free Estimate

[/contact/ →](/contact/)

 

Call 830-388-7330

[tel:+18303887330 →](tel:+18303887330)

-   Over 15 years of experience
-   Licensed and insured
-   Free estimates